Parameter expansion

One core functionality of Bash is to manage parameters. A parameter is an entity that stores values and is referenced by a name, a number or a special symbol.

• parameters referenced by a name are called variables (this also applies to arrays)
• parameters referenced by a number are called positional parameters and reflect the arguments given to a shell
• parameters referenced by a special symbol are auto-set parameters that have different special meanings and uses

Parameter expansion is the procedure to get the value from the referenced entity, like expanding a variable to print its value. On expansion time you can do very nasty things with the parameter or its value. These things are described here.

If you saw some parameter expansion syntax somewhere, and need to check what it can be, try the overview section below!

Arrays can be special cases for parameter expansion, every applicable description mentions arrays below. Please also see the article about arrays.

For a more technical view what a parameter is and which types exist, see the dictionary entry for "parameter".

Looking for a specific syntax you saw, without knowing the name?

• Simple usage
  • $PARAMETER
  • ${PARAMETER}
• Indirection
  • ${!PARAMETER}
• Case modification
  • ${PARAMETER^}
  • ${PARAMETER^^}
  • ${PARAMETER,}
  • ${PARAMETER,,}
  • ${PARAMETER~}
  • ${PARAMETER~~}
• Variable name expansion
  • ${!PREFIX*}
  • ${!PREFIX@}
• Substring removal (also for filename manipulation!)
  • ${PARAMETER#PATTERN}
  • ${PARAMETER##PATTERN}
  • ${PARAMETER%PATTERN}
  • ${PARAMETER%%PATTERN}
• Search and replace
  • ${PARAMETER/PATTERN/STRING}
  • ${PARAMETER//PATTERN/STRING}
  • ${PARAMETER/PATTERN}
  • ${PARAMETER//PATTERN}
• String length
  • ${#PARAMETER}
• Substring expansion
  • ${PARAMETER:OFFSET}
  • ${PARAMETER:OFFSET:LENGTH}
• Use a default value
  • ${PARAMETER:-WORD}
  • ${PARAMETER-WORD}
• Assign a default value
  • ${PARAMETER:=WORD}
  • ${PARAMETER=WORD}
• Use an alternate value
  • ${PARAMETER:+WORD}
  • ${PARAMETER+WORD}
• Display error if null or unset
  • ${PARAMETER:?WORD}
  • ${PARAMETER?WORD}

$PARAMETER

${PARAMETER}

The easiest form is to just use a parameter's name within braces. This is identical to using $FOO like you see it everywhere, but has the advantage that it can be immediately followed by characters that would be interpreted as part of the parameter name otherwise. Compare these two expressions (WORD="car" for example), where we want to print a word with a trailing "s":

echo "The plural of $WORD is most likely $WORDs"
echo "The plural of $WORD is most likely ${WORD}s"

Why does the first one fail? It prints nothing, because a parameter (variable) named "WORDs" is undefined and thus printed as "" (nothing). Without using braces for parameter expansion, Bash will interpret the sequence of all valid characters from the introducing "$" up to the last valid character as name of the parameter. When using braces you just force Bash to only interpret the name inside your braces.

Also, please remember, that parameter names are (like nearly everything in UNIX®) case sentitive!

The second form with the curly braces is also needed to access positional parameters (arguments to a script) beyond $9:

echo "Argument  1 is: $1"
echo "Argument 10 is: ${10}"

See also the article about general array syntax

For arrays you always need the braces. The arrays are expanded by individual indexes or mass arguments. An individual index behaves like a normal parameter, for the mass expansion, please read the article about arrays linked above.

• ${array[5]}
• ${array[*]}
• ${array[@]}

${!PARAMETER}

In some cases, like for example

${PARAMETER}

${PARAMETER:0:3}

you can instead use the form

${!PARAMETER}

to enter a level of indirection. The referenced parameter is not PARAMETER itself, but the parameter whose name is stored as the value of PARAMETER. If the parameter PARAMETER has the value "TEMP", then ${!PARAMETER} will expand to the value of the parameter named TEMP:

read -rep 'Which variable do you want to inspect? ' look_var

printf 'The value of "%s" is: "%s"\n' "$look_var" "${!look_var}" 

Of course the indirection also works with special variables:

# set some fake positional parameters
set one two three four

# get the LAST argument ("#" stores the number of arguments, so "!#" will reference the LAST argument)
echo ${!#}

You can think of this mechanism as being roughly equivalent to taking any parameter expansion that begins with the parameter name, and substituting the !PARAMETER part with the value of PARAMETER.

echo "${!var^^}"
# ...is equivalent to
eval 'echo "${'"$var"'^^}"'

It was an unfortunate design decision to use the ! prefix for indirection, as it introduces parsing ambiguity with other parameter expansions that begin with !. Indirection is not possible in combination with any parameter expansion whose modifier requires a prefix to the parameter name. Specifically, indirection isn't possible on the ${!var@}, ${!var*}, ${!var[@]}, ${!var[*]}, and ${#var} forms. This means the ! prefix can't be used to retrieve the indices of an array, the length of a string, or number of elements in an array indirectly (see indirection for workarounds). Additionally, the !-prefixed parameter expansion conflicts with ksh-like shells which have the more powerful "name-reference" form of indirection, where the exact same syntax is used to expand to the name of the variable being referenced.

Indirect references to array names are also possible since the Bash 3 series (exact version unknown), but undocumented. See indirection for details.

Chet has added an initial implementation of the ksh nameref declaration command to the git devel branch. (declare -n, local -n, etc, will be supported). This will finally address many issues around passing and returning complex datatypes to/from functions.

${PARAMETER^}

${PARAMETER^^}

${PARAMETER,}

${PARAMETER,,}

${PARAMETER~}

${PARAMETER~~}

These expansion operators modify the case of the letters in the expanded text.

The ^ operator modifies the first character to uppercase, the , operator to lowercase. When using the double-form (^^ and ,,), all characters are converted.

The (currently undocumented) operators ~ and ~~ reverse the case of the given text (in PARAMETER).~ reverses the case of first letter of words in the variable while ~~ reverses case for all.Thanks to Bushmills and geirha on the Freenode IRC channel for this finding.

Example: Rename all *.txt filenames to lowercase

for file in *.txt; do
  mv "$file" "${file,,}"
done

Note: The feature worked word-wise in Bash 4 RC1 (a modification of a parameter containing hello world ended up in Hello World, not Hello world). In the final Bash 4 version it works on the whole parameter, regardless of something like "words". IMHO a technically cleaner implementation. Thanks to Chet.

For array expansion, the case modification applies to every expanded element, no matter if you expand an individual index or mass-expand the whole array using @ or * subscripts. Some examples:

Assume: array=(This is some Text)

• echo "${array[@],}"
  • ⇒ this is some text
• echo "${array[@],,}"
  • ⇒ this is some text
• echo "${array[@]^}"
  • ⇒ This Is Some Text
• echo "${array[@]^^}"
  • ⇒ THIS IS SOME TEXT
• echo "${array[2]^^}"
  • ⇒ TEXT

${!PREFIX*}

${!PREFIX@}

This expands to a list of all set variable names beginning with the string PREFIX. The elements of the list are separated by the first character in the IFS-variable (<space> by default).

This will show all defined variable names (not values!) beginning with "BASH":

$ echo ${!BASH*}
BASH BASH_ARGC BASH_ARGV BASH_COMMAND BASH_LINENO BASH_SOURCE BASH_SUBSHELL BASH_VERSINFO BASH_VERSION

This list will also include array names.

${PARAMETER#PATTERN}

${PARAMETER##PATTERN}

${PARAMETER%PATTERN}

${PARAMETER%%PATTERN}

This one can expand only a part of a parameter's value, given a pattern to describe what to remove from the string. The pattern is interpreted just like a pattern to describe a filename to match (globbing). See Pattern matching for more.

Example string (just a quote from a big man):

MYSTRING="Be liberal in what you accept, and conservative in what you send"

${PARAMETER#PATTERN} and ${PARAMETER##PATTERN}

This form is to remove the described pattern trying to match it from the beginning of the string. The operator "#" will try to remove the shortest text matching the pattern, while "##" tries to do it with the longest text matching. Look at the following examples to get the idea (matched text marked striked, remember it will be removed!):

${PARAMETER%PATTERN} and ${PARAMETER%%PATTERN}

In the second form everything will be the same, except that Bash now tries to match the pattern from the end of the string:

How the heck does that help to make my life easier?

Well, maybe the most common use for it is to extract parts of a filename. Just look at the following list with examples:

• Get name without extension
  • ${FILENAME%.*}
  • ⇒ bash_hackers.txt
• Get extension
  • ${FILENAME##*.}
  • ⇒ bash_hackers.txt
• Get directory name
  • ${PATHNAME%/*}
  • ⇒ /home/bash/bash_hackers.txt
• Get filename
  • ${PATHNAME##*/}
  • ⇒ /home/bash/bash_hackers.txt

These are the syntaxes for filenames with a single extension. Depending on your needs, you might need to adjust shortest/longest match.

As for most parameter expansion features, working on arrays will handle each expanded element, for individual expansion and also for mass expansion.

Simple example, removing a trailing is from all array elements (on expansion):

Assume: array=(This is a text)

• echo "${array[@]%is}"
  • ⇒ Th a text
  • (it was: This is a text)

All other variants of this expansion behave the same.

${PARAMETER/PATTERN/STRING}

${PARAMETER//PATTERN/STRING}

${PARAMETER/PATTERN}

${PARAMETER//PATTERN}

This one can substitute (replace) a substring matched by a pattern, on expansion time. The matched substring will be entirely removed and the given string will be inserted. Again some example string for the tests:

MYSTRING="Be liberal in what you accept, and conservative in what you send"

The two main forms only differ in the number of slashes after the parameter name: ${PARAMETER/PATTERN/STRING} and ${PARAMETER//PATTERN/STRING}

The first one (one slash) is to only substitute the first occurrence of the given pattern, the second one (two slashes) is to substitute all occurrences of the pattern.

First, let's try to say "happy" instead of "conservative" in our example string:

${MYSTRING//conservative/happy}

Since there is only one "conservative" in that example, it really doesn't matter which of the two forms we use.

Let's play with the word "in", I don't know if it makes any sense, but let's substitute it with "by".

First form: Substitute first occurrence

${MYSTRING/in/by}

Second form: Substitute all occurrences

${MYSTRING//in/by}

Anchoring Additionally you can "anchor" an expression: A # (hashmark) will indicate that your expression is matched against the beginning portion of the string, a % (percent-sign) will do it for the end portion.

MYSTRING=xxxxxxxxxx
echo ${MYSTRING/#x/y}  # RESULT: yxxxxxxxxx
echo ${MYSTRING/%x/y}  # RESULT: xxxxxxxxxy

If the replacement part is completely omitted, the matches are replaced by the nullstring, i.e., they are removed. This is equivalent to specifying an empty replacement:

echo ${MYSTRING//conservative/}
# is equivalent to
echo ${MYSTRING//conservative}

This parameter expansion type applied to arrays applies to all expanded elements, no matter if an individual element is expanded, or all elements using the mass expansion syntaxes.

A simple example, changing the (lowercase) letter t to d:

Assume: array=(This is a text)

• echo "${array[@]/t/d}"
  • ⇒ This is a dext
• echo "${array[@]//t/d}"
  • ⇒ This is a dexd

${#PARAMETER}

When you use this form, the length of the parameter's value is expanded. Again, a quote from a big man, to have a test text:

MYSTRING="Be liberal in what you accept, and conservative in what you send"

Using echo ${#MYSTRING}…

⇒ 64

The length is reported in characters, not in bytes. Depending on your environment this may not always be the same (multibyte-characters, like in UTF8 encoding).

There's not much to say about it, mh?

For arrays, this expansion type has two meanings:

• For individual elements, it reports the string length of the element (as for every "normal" parameter)
• For the mass subscripts @ and * it reports the number of set elements in the array

Example:

Assume: array=(This is a text)

• echo ${#array[1]}
  • ⇒ 2 (the word "is" has a length of 2)
• echo ${#array[@]}
  • ⇒ 4 (the array contains 4 elements)

Attention: The number of used elements does not need to conform to the highest index. Sparse arrays are possible in Bash, that means you can have 4 elements, but with indexes 1, 7, 20, 31. You can't loop through such an array with a counter loop based on the number of elements!

${PARAMETER:OFFSET}

${PARAMETER:OFFSET:LENGTH}

This one can expand only a part of a parameter's value, given a position to start and maybe a length. If LENGTH is omitted, the parameter will be expanded up to the end of the string. If LENGTH is negative, it's taken as a second offset into the string, counting from the end of the string.

OFFSET and LENGTH can be any arithmetic expression. Take care: The OFFSET starts at 0, not at 1!

Example string (a quote from a big man): MYSTRING="Be liberal in what you accept, and conservative in what you send"

In the first form, the expansion is used without a length value, note that the offset 0 is the first character:

echo ${MYSTRING:34}

In the second form we also give a length value:

echo ${MYSTRING:34:13}

If the given offset is negative, it's counted from the end of the string, i.e. an offset of -1 is the last character. In that case, the length still counts forward, of course. One special thing is to do when using a negative offset: You need to separate the (negative) number from the colon:

${MYSTRING: -10:5}
${MYSTRING:(-10):5}

If the LENGTH value is negative, it's used as offset from the end of the string. The expansion happens from the first to the second offset then:

echo "${MYSTRING:11:-17}"

This works since Bash 4.2-alpha, see also Bash changes.

For arrays, this expansion type has again 2 meanings:

• For individual elements, it expands to the specified substring (as for every “normal” parameter)
• For the mass subscripts @ and * it mass-expands individual array elements denoted by the 2 numbers given (starting element, number of elements)

Example:

Assume: array=(This is a text)

• echo ${array[0]:2:2}
  • ⇒ is (the "is" in "This", array element 0)
• echo ${array[@]:1:2}
  • ⇒ is a (from element 1 inclusive, 2 elements are expanded, i.e. element 1 and 2)

${PARAMETER:-WORD}

${PARAMETER-WORD}

If the parameter PARAMETER is unset (never was defined) or null (empty), this one expands to WORD, otherwise it expands to the value of PARAMETER, as if it just was ${PARAMETER}. If you omit the : (colon), like shown in the second form, the default value is only used when the parameter was unset, not when it was empty.

echo "Your home directory is: ${HOME:-/home/$USER}."
echo "${HOME:-/home/$USER} will be used to store your personal data."

If HOME is unset or empty, everytime you want to print something useful, you need to put that parameter syntax in.

#!/bin/bash

read -p "Enter your gender (just press ENTER to not tell us): " GENDER
echo "Your gender is ${GENDER:-a secret}."

It will print "Your gender is a secret." when you don't enter the gender. Note that the default value is used on expansion time, it is not assigned to the parameter.

For arrays, the behaviour is very similar. Again, you have to make a difference between expanding an individual element by a given index and mass-expanding the array using the @ and * subscripts.

• For individual elements, it's the very same: If the expanded element is NULL or unset (watch the :- and - variants), the default text is expanded
• For mass-expansion syntax, the default text is expanded if the array
  • contains no element or is unset (the :- and - variants mean the same here)
  • contains only elements that are the nullstring (the :- variant)

In other words: The basic meaning of this expansion type is applied as consistent as possible to arrays.

Example code (please try the example cases yourself):

####
# Example cases for unset/empty arrays and nullstring elements
####


### CASE 1: Unset array (no array)

# make sure we have no array at all
unset array

echo ${array[@]:-This array is NULL or unset}
echo ${array[@]-This array is NULL or unset}

### CASE 2: Set but empty array (no elements)

# declare an empty array
array=()

echo ${array[@]:-This array is NULL or unset}
echo ${array[@]-This array is NULL or unset}


### CASE 3: An array with only one element, a nullstring
array=("")

echo ${array[@]:-This array is NULL or unset}
echo ${array[@]-This array is NULL or unset}


### CASE 4: An array with only two elements, a nullstring and a normal word
array=("" word)

echo ${array[@]:-This array is NULL or unset}
echo ${array[@]-This array is NULL or unset}

${PARAMETER:=WORD}

${PARAMETER=WORD}

This one works like the using default values, but the default text you give is not only expanded, but also assigned to the parameter, if it was unset or null. Equivalent to using a default value, when you omit the : (colon), as shown in the second form, the default value will only be assigned when the parameter was unset.

echo "Your home directory is: ${HOME:=/home/$USER}."
echo "$HOME will be used to store your personal data."

After the first expansion here (${HOME:=/home/$USER}), HOME is set and usable.

Let's change our code example from above:

#!/bin/bash

read -p "Enter your gender (just press ENTER to not tell us): " GENDER
echo "Your gender is ${GENDER:=a secret}."
echo "Ah, in case you forgot, your gender is really: $GENDER"

For arrays this expansion type is limited. For an individual index, it behaves like for a "normal" parameter, the default value is assigned to this one element. The mass-expansion subscripts @ and * can not be used here because it's not possible to assign to them!

${PARAMETER:+WORD}

${PARAMETER+WORD}

This form expands to nothing if the parameter is unset or empty. If it is set, it does not expand to the parameter's value, but to some text you can specify:

echo "The Java application was installed and can be started.${JAVAPATH:+ NOTE: JAVAPATH seems to be set}"

Some more unrealistic example… Ask for some flags (for whatever reason), and then, if they were set, print a warning and also print the flags:

#!/bin/bash

read -p "If you want to use special flags, enter them now: " SPECIAL_FLAGS
echo "The installation of the application is finished${SPECIAL_FLAGS:+ (NOTE: there are special flags set: $SPECIAL_FLAGS)}."

If you omit the colon, as shown in the second form (${PARAMETER+WORD}), the alternate value will be used if the parameter is set (and it can be empty)! You can use it, for example, to complain if variables you need (and that can be empty) are undefined:

# test that with the three stages:

# unset foo
# foo=""
# foo="something"

if [[ ${foo+isset} = isset ]]; then
  echo "foo is set..."
else
  echo "foo is not set..."
fi

Similar to the cases for arrays to expand to a default value, this expansion behaves like for a "normal" parameter when using individual array elements by index, but reacts differently when using the mass-expansion subscripts @ and *:

• For individual elements, it's the very same: If the expanded element is not NULL or unset (watch the :+ and + variants), the alternate text is expanded
• For mass-expansion syntax, the alternate text is expanded if the array
  • contains elements where min. one element is not a nullstring (the :+ and + variants mean the same here)
  • contains only elements that are not the nullstring (the :+ variant)

For some cases to play with, please see the code examples in the description for using a default value.

${PARAMETER:?WORD}

${PARAMETER?WORD}

If the parameter PARAMETER is set/non-null, this form will simply expand it. Otherwise, the expansion of WORD will be used as appendix for an error message:

$ echo "The unset parameter is: ${p_unset?not set}"
bash: p_unset: not set

After printing this message,

• an interactive shell has $? to a non-zero value
• a non-interactive shell exits with a non-zero exit code

The meaning of the colon (:) is the same as for the other parameter expansion syntaxes: It specifies if

• only unset or
• unset and empty parameters

are taken into account.

Removing the first 6 characters from a text string:

STRING="Hello world"

# only print 'Hello'
echo "${STRING%??????}"

# only print 'world'
echo "${STRING#??????}"

# store it into the same variable
STRING=${STRING#??????}

• Fixed in 4.2.36 ( patch). Bash doesn't follow either POSIX or its own documentation when expanding either a quoted "$@" or "${arr[@]}" with an adjacent expansion. "$@$x" expands in the same way as "$*$x" - i.e. all parameters plus the adjacent expansion are concatenated into a single argument. As a workaround, each expansion needs to be quoted separately. Unfortunately, this bug took a very long time to notice.

  ~ $ set -- a b c; x=foo; printf '<%s> ' "$@$x" "$*""$x" "$@""$x"
  <a b cfoo> <a b cfoo> <a> <b> <cfoo>

• Almost all shells disagree about the treatment of an unquoted $@, ${arr[@]}, $*, and ${arr[*]} when IFS is set to null. POSIX is unclear about the expected behavior. A null IFS causes both word splitting and pathname expansion to behave randomly. Since there are few good reasons to leave IFS set to null for more than the duration of a command or two, and even fewer to expand $@ and $* unquoted, this should be a rare issue. Always quote them!

  touch x 'y z'
  for sh in bb {{d,b}a,{m,}k,z}sh; do
      echo "$sh"
      "$sh" -s a 'b c' d \* </dev/fd/0
  done <<\EOF
  ${ZSH_VERSION+:} false && emulate sh
  IFS=
  printf '<%s> ' $*
  echo
  printf "<%s> " $@
  echo
  EOF

  bb
  <ab cd*>
  <ab cd*>
  dash
  <ab cd*>
  <ab cd*>
  bash
  <a> <b c> <d> <x> <y z>
  <a> <b c> <d> <x> <y z>
  mksh
  <a b c d *>
  <a b c d *>
  ksh
  <a> <b c> <d> <x> <y z>
  <a> <b c> <d> <x> <y z>
  zsh
  <a> <b c> <d> <x> <y z>
  <a> <b c> <d> <x> <y z>

  When IFS is set to a non-null value, or unset, all shells behave the same - first expanding into separate args, then applying pathname expansion and word-splitting to the results, except for zsh, which doesn't do pathname expansion in its default mode.

• Additionally, shells disagree about various wordsplitting behaviors, the behavior of inserting delimiter characters from IFS in $*, and the way adjacent arguments are concatenated, when IFS is modified in the middle of expansion through side-effects.

  for sh in bb {{d,b}a,po,{m,}k,z}sh; do
      printf '%-4s: ' "$sh"
      "$sh" </dev/fd/0
  done <<\EOF
  ${ZSH_VERSION+:} false && emulate sh
  set -f -- a b c
  unset -v IFS
  printf '<%s> ' ${*}${IFS=}${*}${IFS:=-}"${*}"
  echo
  EOF

  bb  : <a b cabc> <a-b-c>
  dash: <a b cabc> <a-b-c>
  bash: <a> <b> <ca> <b> <c-a b c>
  posh: <a> <b> <ca b c> <a-b-c>
  mksh: <a> <b> <ca b c> <a-b-c>
  ksh : <a> <b> <ca> <b> <c> <a b c>
  zsh : <a> <b> <ca> <b> <c> <a-b-c>

  ksh93 and mksh can additionally achieve this side effect (and others) via the ${ cmds;} expansion. I haven't yet tested every possible side-effect that can affect expansion halfway through expansion that way.

• As previously mentioned, the Bash form of indirection by prefixing a parameter expansion with a ! conflicts with the same syntax used by mksh, zsh, and ksh93 for a different purpose. Bash will "slightly" modify this expansion in the next version with the addition of namerefs.

• Bash (and most other shells) don't allow .'s in identifiers. In ksh93, dots in variable names are used to reference methods (i.e. "Discipline Functions"), attributes, special shell variables, and to define the "real value" of an instance of a class.

• In ksh93, the _ parameter has even more uses. It is used in the same way as self in some object-oriented languages; as a placeholder for some data local to a class; and also as the mechanism for class inheritance. In most other contexts, _ is compatible with Bash.

• Bash only evaluates the subscripts of the slice expansion (${x:y:z}) if the parameter is set (for both nested expansions and arithmetic). For ranges, Bash evaluates as little as possible, i.e., if the first part is out of range, the second won't be evaluated. ksh93 and mksh always evaluate the subscript parts even if the parameter is unset.

   $ bash -c 'n="y[\$(printf yo >&2)1]" m="y[\$(printf jo >&2)1]"; x=(); echo "${x[@]:n,6:m}"' # No output
   $ bash -c 'n="y[\$(printf yo >&2)1]" m="y[\$(printf jo >&2)1]"; x=([5]=hi); echo "${x[@]:n,6:m}"'
  yo
   $ bash -c 'n="y[\$(printf yo >&2)1]" m="y[\$(printf jo >&2)1]"; x=([6]=hi); echo "${x[@]:n,6:m}"'
  yojo
   $ bash -c 'n="y[\$(printf yo >&2)1]" m="y[\$(printf jo >&2)1]"; x=12345; echo "${x:n,5:m}"'
  yojo
   $ bash -c 'n="y[\$(printf yo >&2)1]" m="y[\$(printf jo >&2)1]"; x=12345; echo "${x:n,6:m}"'
  yo

• In most shells, when dealing with an "alternate" parameter expansion that expands to multiple words, and nesting such expansions, not all combinations of nested quoting are possible.

# Bash
 $ typeset -a a=(meh bleh blerg) b
 $ IFS=e
 $ printf "<%s> " "${b[@]-"${a[@]}" "${a[@]}"}"; echo # The entire PE is quoted so Bash considers the inner quotes redundant.
<meh> <bleh> <blerg meh> <bleh> <blerg>
 $ printf "<%s> " "${b[@]-${a[@]} ${a[@]}}"; echo # The outer quotes cause the inner expansions to be considered quoted.
<meh> <bleh> <blerg meh> <bleh> <blerg>
 $ b=(meep beep)
 $ printf "<%s> " "${b[@]-"${a[@]}" "${a[@]}"}" "${b[@]-${a[@]} ${a[@]}}"; echo # Again no surprises. Outer quotes quote everything recursively.
<meep> <beep> <meep> <beep>

Now lets see what can happen if we leave the outside unquoted.

# Bash
 $ typeset -a a=(meh bleh blerg) b
 $ IFS=e
 $ printf "<%s> " ${b[@]-"${a[@]}" "${a[@]}"}; echo # Inner quotes make inner expansions quoted.
<meh> <bleh> <blerg meh> <bleh> <blerg>
 $ printf "<%s> " ${b[@]-${a[@]} ${a[@]}}; echo' # No quotes at all wordsplits / globs, like you'd expect.
<m> <h> <bl> <h> <bl> <rg m> <h> <bl> <h> <bl> <rg>

This all might be intuitive, and is the most common implementation, but this design sucks for a number of reasons. For one, it means Bash makes it absolutely impossible to expand any part of the inner region unquoted while leaving the outer region quoted. Quoting the outer forces quoting of the inner regions recursively (except nested command substitutions of course). Word-splitting is necessary to split words of the inner region, which cannot be done together with outer quoting. Consider the following (only slightly far-fetched) code:

# Bash (non-working example)

unset -v IFS # make sure we have a default IFS

if some crap; then
    typeset -a someCmd=(myCmd arg1 'arg2 yay!' 'third*arg*' 4)
fi

someOtherCmd=mycommand
typeset -a otherArgs=(arg3 arg4)

# What do you think the programmer expected to happen here?
# What do you think will actually happen...

"${someCmd[@]-"$someOtherCmd" arg2 "${otherArgs[@]}"}" arg5

This final line is perhaps not the most obvious, but I've run into cases were this type of logic can be desirable and realistic. We can deduce what was intended:

• If someCmd is set, then the resulting expansion should run the command: "myCmd" "arg1" "arg2 yay!" "third*arg*" "4" "arg5"
• Otherwise, if someCmd is not set, expand $someOtherCmd and the inner args, to run a different command: "mycommand" "arg2" "arg3" "arg4" "arg5".

Unfortunately, it is impossible to get the intended result in Bash (and most other shells) without taking a considerably different approach. The only way to split the literal inner parts is through word-splitting, which requires that the PE be unquoted. But, the only way to expand the outer expansion correctly without word-splitting or globbing is to quote it. Bash will actually expand the command as one of these:

# The quoted PE produces a correct result here...
 $ bash -c 'typeset -a someCmd=(myCmd arg1 "arg2 yay!" "third*arg*" 4); printf "<%s> " "${someCmd[@]-"$someOtherCmd" arg2 "${otherArgs[@]}"}" arg5; echo'
<myCmd> <arg1> <arg2 yay!> <third*arg*> <4> <arg5>

# ...but in the opposite case the first 3 arguments are glued together. There are no workarounds.
 $ bash -c 'typeset -a otherArgs=(arg3 arg4); someOtherCmd=mycommand; printf "<%s> " "${someCmd[@]-"$someOtherCmd" arg2 "${otherArgs[@]}"}" arg5; echo'
<mycommand arg2 arg3> <arg4> <arg5>

# UNLESS! we unquote the outer expansion allowing the inner quotes to
# affect the necessary parts while allowing word-splitting to split the literals:
 $ bash -c 'typeset -a otherArgs=(arg3 arg4); someOtherCmd=mycommand; printf "<%s> " ${someCmd[@]-"$someOtherCmd" arg2 "${otherArgs[@]}"} arg5; echo'
<mycommand> <arg2> <arg3> <arg4> <arg5>

# Success!!!
 $ bash -c 'typeset -a someCmd=(myCmd arg1 "arg2 yay!" "third*arg*" 4); printf "<%s> " ${someCmd[@]-"$someOtherCmd" arg2 "${otherArgs[@]}"} arg5; echo'
<myCmd> <arg1> <arg2> <yay!> <third*arg*> <4> <arg5>

# ...Ah f^^k. (again, no workaround possible.)

To the best of my knowledge, ksh93 is the only shell that acts differently. Rather than forcing nested expansions into quoting, a quote at the beginning and end of the nested region will cause the quote state to reverse itself within the nested part. I have no idea whether it's an intentional or documented effect, but it does solve the problem and consequently adds a lot of potential power to these expansions.

All we need to do is add two extra double-quotes:

# ksh93 passing the two failed tests from above:

 $ ksh -c 'otherArgs=(arg3 arg4); someOtherCmd="mycommand"; printf "<%s> " "${someCmd[@]-""$someOtherCmd" arg2 "${otherArgs[@]}""}" arg5; echo'
<mycommand> <arg2> <arg3> <arg4> <arg5>

 $ ksh -c 'typeset -a someCmd=(myCmd arg1 "arg2 yay!" "third*arg*" 4); printf "<%s> " "${someCmd[@]-""$someOtherCmd" arg2 "${otherArgs[@]}""}" arg5; echo'
<myCmd> <arg1> <arg2 yay!> <third*arg*> <4> <arg5>

This can be used to control the quote state of any part of any expansion to an arbitrary depth. Sadly, it is the only shell that does this and the difference may introduce a possible compatibility problem.

• Internal: Introduction to expansion and substitution
• Internal: Arrays
• Dictionary, internal: Parameter

 Discussion 

Stan R., 2010/06/20 01:48

Found an error under the "Search and replace" sub-heading, near the beginning of the "Anchoring" section, where there is an example snippet:

MYSTRING=xxxxxxxxxx
echo ${MYSTRING//#x/y}  # RESULT: yxxxxxxxxx
echo ${MYSTRING//%x/y}  # RESULT: xxxxxxxxxy

This should be:

MYSTRING=xxxxxxxxxx
echo ${MYSTRING/#x/y}  # RESULT: yxxxxxxxxx
echo ${MYSTRING/%x/y}  # RESULT: xxxxxxxxxy

The difference is MYSTRING/ instead of MYSTRING//, since you cannot have both anchoring and .

Jan Schampera, 2010/06/20 14:56

Thanks for this finding. A late night typo, maybe :)

Stan R., 2010/06/21 03:11

Glad I could help.

Shmerl, 2010/10/20 18:37

I found an error. You write:

${PARAMETER:-WORD} ${PARAMETER-WORD} If the parameter PARAMETER is unset (never was defined) or null (empty), this one expands to WORD, otherwise it expands to the value of PARAMETER, as if it just was ${PARAMETER}. If you omit the : (colon), like shown in the second form, the default value is only used when the parameter was unset, not when it was empty.

Running a simple test

str=""; echo ${str-test_result}

Produces:

test_result

Now running:

unset str; echo ${str-test_result}

Produces nothing. So the above is just the opposite. It should be: If you omit the : (colon), like shown in the second form, the default value is only used when the parameter was empty, not when it was usnet.

Jan Schampera, 2010/10/20 23:13

It works (and always worked) for me:

bonsai@core:~$ str=""; echo ${str-test_result}

bonsai@core:~$ unset str; echo ${str-test_result}
test_result
bonsai@core:~$ 

I'm not sure what could be the reason for your tests to do the exact opposite. Is this really a Bash? Though, this behaviour is specified by POSIX(R), too: "In the parameter expansions [shown previously], use of the <colon> in the format shall result in a test for a parameter that is unset or null; omission of the <colon> shall result in a test for a parameter that is only unset."

Do you have any way to find out where your (or my) problem is here?

Shmerl, 2010/10/21 17:59

Sorry, I really meant the case with plus.

Run this test:

str=""; echo ${str+'test_result'}

produces: test_result

unset str; echo ${str+'test_result'}

produces: (nothing)

I was wrong about other cases, this difference only applies to + (alternative value) case.

Shmerl, 2010/10/21 18:03

Make sure there is a plus there - the preview ate it.

Jan Schampera, 2010/10/23 11:36

It does exactly what it should do. + produces an alternate value, means it expands to something instead of the real value of the parameter, if the parameter is "set" (+) or "set or null" (:+).

Shmerl, 2010/10/24 06:20

Yes, but your text in the wiki above is misleading. It writes:

If you omit the colon, as shown in the second form (${PARAMETER+WORD}), the alternate value will not be used when the parameter is empty, only if it is unset!

While it should say:

If you omit the colon, as shown in the second form (${PARAMETER+WORD}), the alternate value will not be used when the parameter is unset, only if it is empty!

Jan Schampera, 2010/10/24 08:09

Oh, yes! Sorry, it took a while to see what you mean :(

I rephrased it a bit. If you're not okay with it, feel free to change it. Thanks for pointing it out.

Shmerl, 2010/10/20 18:38

Actually the previous note relates to all similar examples with :-, :=, etc.

my, 2011/01/25 11:55

the ${ ^^ } and friends have a pattern parameter. But it seems anything beyond [ ] does not work.

TEST="abcABCxyz"

echo ${TEST^[abc]} # change first char if it is a||b||c 
echo ${TEST^![abc]} # change first char if it is NOT a||b||c 

TEST="hello world"
echo ${TEST^^[aeiou]}    # change ANY char that is in aeiou

AbcABCxyz
abcABCxyz
hEllO wOrld

Jan Schampera, 2011/02/01 06:30

I don't see what doesn't work here. Did you mean

${TEST^[!abc]}
# (instead of ${TEST^![abc]})

here?

Frederick Grose, 2011/02/11 23:43

In GNU bash, 4.1.7(1)-release (x86_64-redhat-linux-gnu),

the 'Negative Length Value' syntax,

echo "${MYSTRING:11:-17}"

results in the following:

bash: -17: substring expression < 0

LENGTH seems to behave like the array element COUNT.

Jan Schampera, 2011/02/12 09:44

Hello Frederick,

you're absolutely right, this is a Bash 4.2 feature. I added a note.

Altair IV, 2012/01/12 14:02

Hmm? The [b]${!array[*]}[/b]/[b]${!array[@]}[/b] patterns aren't listed here? They print out a list of all existing array indexes, and can be used for looping through sparse and associative arrays.

Jan Schampera, 2012/06/20 23:24

This is listed in the arrays page, but might belong here, too, yes. It's a mixed subject, since all array-related expansion is parameter expansion.

David C, 2012/04/27 02:01

Under your Code Example of Substring Removal, you only remove 1 character per "?". Therefore the example needs to be updated to echo "${STRING#??????}" (6 question marks). Another example for context would be echo "${STRING%??????}" which will give you "Hello".

Jan Schampera, 2012/06/20 23:18

Late but fixed. Thank you.

R.W. Emerson II, 2012/12/17 10:58

How do we determine whether one string contains another? How do we find the position of the embedded substring?

Substring removal offers a solution. If the substring is present, substring removal will change the length of the enclosing string. The $tFind position can be derived from the length difference.

declare    tText="ABCDEFG"
declare    tFind="CD"
declare    tTemp=${tText/"$tFind"/}  # $tFind present in $tText?
declare -i tFPos                     # Calculate $tFind position

if test "$Text" != "$tTemp" ; then
  echo "Found $tFind in $tText"
fi


tTemp=${tText#*"$tFind"}                  # "EFG" (Out of original 7 characters, 3 remain so 7-3=4 were removed)
tFPos=${#tText}-${#tTemp}-${#tFind}       # 7-3-2=2 (Out of 4 removed, $tFind accounts for 2, so 2 precede $tFind) 
echo "Found $tFind at position $tFPos"    # 2

It is necessary to quote $tFind in the pattern field, to prevent extraneous effects when $tFind contains brackets or other special pattern characters.

liungkejin, 2013/05/30 08:47

only "${!PREFIX*}" is separated by the first character in the IFS-variable ${!PREFIX*}, ${!PREFIX@} and "${!PREFIX@}" are separated by space

testone=; testtwo=; testthree=;
IFS=":";
echo "${!test*}"
        => testone:testtwo:testthree
echo ${!test*}
        => testone testtwo testthree
echo ${!test@}
        => testone testtwo testthree
echo "${!test@}"
        => testone testtwo testthree

Dick Guertin, 2014/06/07 05:40

Under "String length", I'd add that the Parameter can be a system variable, like the positional variables, but with # replacing $. Thus, something like this is valid: ${#1} for the length of the $1 variable.

Roman S., 2015/02/23 20:17

Hello there,

@1st thanks for sharing your ideas and experiences

This site is supported by Performing Databases - your experts for database administration

---