The Web Proxy Auto-Discovery Protocol (WPAD) is a method used by clients to locate the URL of a configuration file using DHCP and/or DNS discovery methods. Once detection and download of the configuration file is complete, it can be executed to determine the proxy for a specified URL.
The WPAD protocol only outlines the mechanism for discovering the location of this file, but the most commonly deployed configuration file format is the proxy auto-config format originally designed by Netscape in 1996 for Netscape Navigator 2.0. The WPAD protocol was drafted by a consortium of companies including Inktomi Corporation, Microsoft Corporation, RealNetworks, Inc., and Sun Microsystems, Inc. (now Oracle Corp.). WPAD is documented in an INTERNET-DRAFT which expired in December 1999. However, WPAD is still supported by all major browsers. WPAD was first included with Internet Explorer 5.0.
In order for all browsers in an organization to be supplied the same proxy policy, without configuring each browser manually, both the below technologies are required:
- Proxy auto-config (PAC) standard: create and publish one central proxy configuration file. Details are discussed in a separate article.
- Web Proxy Auto-Discovery Protocol (WPAD) standard: ensure that an organization's browsers will find this file without manual configuration. This is the topic of this article.
The WPAD standard defines two alternative methods the system administrator can use to publish the location of the proxy configuration file, using the Dynamic Host Configuration Protocol (DHCP) or the Domain Name System (DNS):
Before fetching its first page, a web browser implementing this method sends a DHCPINFORM query to the local DHCP server, and uses the URL from the WPAD option in the server's reply. If the DHCP server does not provide the desired information, DNS is used. If, for example, the network name of the user's computer is pc.department.branch.example.com, the browser will try the following URLs in turn until it finds a proxy configuration file within the domain of the client:
- http://wpad.com/wpad.dat (in incorrect implementations, see note in Security below)
(Note: These are examples and are not "live" URLs due to them employing the reserved domain name of "example.com".)
Additionally on Windows if the DNS query is unsuccessful then Link-Local Multicast Name Resolution (LLMNR) and/or NetBIOS will be used.
DHCP has a higher priority than DNS: if DHCP provides the WPAD URL, no DNS lookup is performed. This only works with DHCPv4. In DHCPv6, there is no WPAD-Option defined.
Notice that Firefox does not support DHCP, only DNS, and the same is true for Chrome on platforms other than Windows and ChromeOS, and for versions of Chrome older than version 13.
When constructing the query packet, DNS lookup removes the first part of the domain name (the client host name) and replaces it with wpad. Then, it "moves up" in the hierarchy by removing more parts of the domain name, until it finds a WPAD PAC file or leaves the current organisation.
The browser guesses where the organisation boundaries are. The guess is often right for domains like 'company.com' or 'university.edu', but wrong for 'company.co.uk' (see security below).
For DNS lookups, the path of the configuration file is always wpad.dat. For the DHCP protocol, any URL is usable. For traditional reasons, PAC files are often called proxy.pac (of course, files with this name will be ignored by the WPAD DNS search).
The MIME type of the configuration file must be "application/x-ns-proxy-autoconfig". See Proxy auto-config for more details.
Internet Explorer and Konqueror are currently the only browsers offering support for both the DHCP and DNS methods; the DNS method is supported by most major browsers.
In order for WPAD to work, a few requirements have to be met:
- In order to use DHCP, the server must be configured to serve up the "site-local" option 252 ("auto-proxy-config") with a string value of eg http://example.com/wpad.dat where "example.com" is the address of a Web server.
- In order to use the DNS only method, a DNS entry is needed for a host named WPAD.
- The host at the WPAD address must be able to serve a Web page.
- In both cases, the Web server must be configured to serve the WPAD file with a MIME type of
- If the DNS method is used, a file named wpad.dat must be located in the WPAD Web site's root directory.
- The PAC files are discussed in the Proxy auto-config article.
- Use caution when configuring a WPAD server in a virtual hosting environment. When automatic proxy detection is used, WinHTTP and WinINET in Internet Explorer 6 and earlier send a "Host: <IP address>" header and IE7+ and Firefox sends a "Host: wpad" header. Therefore it is recommended that the wpad.dat file be hosted under the default virtual host rather than its own.
- Internet Explorer version 6.0.2900.2180.xpsp_sp2_rtm requests "wpad.da" instead of "wpad.dat" from the Web server.
- If you are using Windows Server 2003 (or later) as your DNS server, you might have to disable the DNS Server Global Query Block List, or even modify the registry to edit the list of blocked queries.
While greatly simplifying configuration of one organisation's web browsers, the WPAD protocol has to be used with care: simple mistakes can open doors for attackers to change what appears on a user's browser:
- An attacker inside a network can set up a DHCP server that hands out the URL of a malicious PAC script.
- If the network is 'company.co.uk' and the file http://wpad.company.co.uk/wpad.dat isn't served, the browsers will go on to request http://wpad.co.uk/wpad.dat. The browser doesn't determine whether this is still inside the organization. See http://wpad.com/ for an example.
- The same method has been used with http://wpad.org.uk. This used to serve a wpad.dat file that would redirect all of the user's traffic to an internet auction site.
- ISPs that have implemented DNS hijacking can break the DNS lookup of the WPAD protocol by directing users to a host that is not a proxy server.
- Leaked WPAD queries could result in domain name collisions with internal network naming schemes. If an attacker registers a domain to answer leaked WPAD queries and configures a valid proxy, there is potential to conduct man-in-the-middle (MitM) attacks across the Internet.
Through the WPAD file, the attacker can point users' browsers to their own proxies and intercept and modify all of WWW traffic. Although a simplistic fix for Windows WPAD handling was applied in 2005, it only fixed the problem for the .com domain. A presentation at Kiwicon showed that the rest of the world was still critically vulnerable to this security hole, with a sample domain registered in New Zealand for testing purposes receiving proxy requests from all over the country at the rate of several a second. Several of the wpad.tld domain names (including COM, NET, ORG, and US) now point to the client loopback address to help protect against this vulnerability, though some names are still registered (wpad.co.uk).
Thus, an administrator should make sure that a user can trust all the DHCP servers in an organisation and that all possible wpad domains for the organisation are under control. Furthermore, if there's no wpad domain configured for an organisation, a user will go to whatever external location has the next wpad site in the domain hierarchy and use that for its configuration. This allows whoever registers the wpad subdomain in a particular country to perform a man-in-the-middle attack on large portions of that country's internet traffic by setting themselves as a proxy for all traffic or sites of interest.